Double Glazed Window Repair
It's worth looking over the warranty that comes with most double-glazed windows. Generally, it includes any issues with the hardware of the window such as hinges and locking mechanisms within the first 10 years.
A leak in the seal is usually the cause of mist between your glass windows. This needs to be repaired immediately to avoid damp or mould growing in your home.
Condensation Between the Windows
If you notice condensation appearing between your windows, this is an indication that the seal holding in the gases that insulate the window has failed. This is a serious issue that must be dealt with immediately, particularly in winter, when humidity levels are at their highest. It could cause damage around the sills and sealant, or even mildew or mould.
Ideally double-glazed windows shouldn't have condensation between the panes. window maintenance could be caused by extreme humidity or a cold snap. Fortunately, it is repairable without having to replace the entire window. A professional can make small holes in the glass and spray the inside of the window with a special cleaning solution. The water is then sucked out of the window, and an anti-fogger device can be fitted to prevent any further buildup of moisture in the future.
Condensation can also occur between windows due to air leakage, or other factors outside the window. If this is the case, it will likely take longer for moisture to gather inside the window, since the air has to be warm enough for the water molecules to evaporate. In these situations it is recommended to replace the double glazed windows rather than repair the seals on the existing units.
A double-glazed glass window is comprised of two or more pieces of insulated tempered glass, which are joined by a metal framework. The gap in the middle of the windows is filled with a non-toxic insulating gas such as argon or krypton and then sealed tightly. The seal prevents the gases that are insulating from escape and also prevents air and moisture from entering the gap.
As windows get older, the seals weaken and allow moisture to enter the gap between the glass panes. If the seals begin to leak, it is important to be aware of this since it means that the double glazing no longer performs as well as before. This can result in poor energy efficiency, higher heating bills, damaged property, and the possibility of condensation between the windows.
Mist
It is perfectly normal to see condensation on your windows. This means that your double glazing system is working properly and is keeping the heat inside your home. The condensation develops because the air outside is warmer than the glass, and reaches its dew point before the window. Double glazing of high quality is an excellent method to get this.
If you notice condensation on the inside of the window, this could be an indication of a ventilation issue within your home. The moisture that is accumulating can't go anywhere else and ends in the window, carpets, furniture, and other areas of your home. It is possible to prevent this by having it inspected by a professional and making sure that there is plenty of fresh air inside your home.
Another reason for mist on double-glazed windows is because the seal between two panes of glass has been broken. This can be due to wear and tear or chemical cleaning solutions that are being employed. If this is the case the best solution is to get the windows repaired as soon as you can.
The professional repair of your windows will ensure that they are waterproof and free of fogging, condensation and misting. It's also less expensive than replacing them completely and will also help you save money on your energy bills.
A registered window installer with FENSA can give you a quote to repair or replace your double-glazed windows. Upgrade your old windows to energy-efficient A-rated ones if they are very old.
It is best to keep copies of any agreements and warranties with the window installers. This will be very useful if any problems with the windows arise in the future, and you are able to then contact your fitters to resolve the issues. This is a better option than simply ignore the issues, which will only get worse and may lead to other issues in your home.
Close or open without difficulty
It's not only annoying when double-glazed windows can be difficult to open or close. They can also result in higher energy bills because of the loss of heat and draughts. It can also pose security risk, particularly when the locks aren't functioning correctly. You should fix any double-glazed windows and doors in the earliest time possible.
If you are unable to open your window and have tried the most basic of solutions such as using a screwdriver in order to break it open or tapping around the frame with a tough object, then the problem might be more serious. It could be that the window has shifted within its frame and requires to be re-set or there is an opening between the glass panes and frames. In either case, you should seek out an experienced double glazing repair expert to ensure that the proper repairs are done and to avoid any future issues.
It is not uncommon to find UPVC window handles and lock mechanisms to become difficult to operate or become stuck particularly if they're old and worn. This is due to an accumulation of dirt or grease inside the handle. This can be resolved by cleaning it with a uPVC cleaner. If this doesn't work then you can try gently tapping the uPVC frame using a hard object like an screwdriver, but be careful not to scratch the handle or the window handle mechanism.
If this doesn't solve the problem then the window will have to be replaced since the hinges may no longer be in the correct position or the locking mechanism might have been damaged. In this case you should speak to an UPVC window expert.
David The Window Wizard specialises in all technical aspects of double glazed window and door repair, including fixing a jammed or shut double glass window. He has vast experience converting discontinued window mechanisms to modern ones and often can save you the cost of replacing the whole window. Call or email us today for more details or a free quote.
Warping
Double-glazed windows can be an excellent way to save energy in your home. They consist of two separate panes, with a spacer gas or air between the panes, creating an airtight seal that keeps cold air out and warm air inside. However with time, these windows can be damaged or broken and require repair. Fortunately, the majority of repairs are simple and can be done without the cost of replacing the entire window.
One common problem that double glazed windows experience is warping. This happens when windows begin to bow, bend, or twist, which can affect the structural integrity of the window and its ability to insulate. The best way to avoid this issue is to make sure that your double-glazed windows are properly installed and maintained regularly.
Get in touch with a professional as soon as you realize that your double-glazed windows are sagging. This will help keep the issue from getting worse. They can inspect your windows and identify the cause of the warping. They will then use specific tools to correct the issue and ensure that your windows are completely sealed.
A common cause for this issue is the presence of water vapour between the windows, which can accumulate over time. This can be caused by various elements, such as the weather as well as humidity levels and temperature changes. To resolve this issue the expert will drill a small hole through the window to release the moisture. The specialist will use a cleaner on the glass to clean it and then apply sealant.
If your windows aren't able to be shut or opened it could be due to a broken mechanism or hinges. Before calling an expert to resolve the issue, it's recommended to lubricate these parts. This will usually resolve the issue and decrease your need for replacements. If your windows are very old or do not provide the level of insulation that you'd like to have it is usually better to replace them.
